6 AMP 24 VOLT 2.4 GHz TRACKSIDE R/C.
3 amp & 12 amp versions available soon.
RCS is once again making Cordless Walkaround trackside R/C.
Suitable for "N" scale to "Large Scale".
Rock solid R/C with centre OFF knob to control both speed and direction.  
Automatic Rx "Binding".
Suitable for all non DCC locos.
Add the Crest 57091 PWM to Linear Converter for use with DCC locos.
At least 200' range.
TTC handpiece & 6 amp Base unit for just A$268 + postage.

  

Model Price Image Description
3 AMP TRACKSIDE RADIO CONTROL
COMING SOON - FOR "N" SCALE - "H0" SCALE LOCOS
TITAN-3A
Trackside R/C
  A$149  PIC SOON CAB "A" 3 amp R/C base unit.
Use 6 - 14 volts regulated DC supply.  Must be externally fused.
PDF Instructions
TITAN-3B
Trackside R/C
  A$149   PIC SOON CAB "B" 3 amp R/C base unit.
Use 6 - 14 volts regulated DC supply.  Must be externally fused.
PDF Instructions
6 AMP TRACKSIDE RADIO CONTROL
FOR "0" SCALE & SMALLER LARGE SCALE LOCOS.
TITAN-6A
Trackside R/C

 A$179

 CAB "A" 6 amp R/C base unit.
Use 12 - 24 volts regulated DC supply.  Must be externally fused.
PDF Instructions
TITAN-6B
Trackside R/C
 A$179

CAB "B" 6 amp R/C base unit.
Use 12 - 24 volts regulated DC supply.  Must be externally fused.
PDF Instructions
12 AMP TRACKSIDE RADIO CONTROL
COMING SOON - FOR HEAVY DUTY LARGE SCALE LOCOS.
TITAN-12A
Trackside R/C
 A$199  PIC SOON CAB "A" 12 amp R/C base unit.
Use 12 - 24 volts regulated DC supply.  Must be externally fused.
PDF Instructions
TITAN-12B
Trackside R/C
 A$199  PIC SOON CAB "B" 12 amp R/C base unit.
Use 12 - 24 volts regulated DC supply.  Must be externally fused.
PDF Instructions
To which you add the following budget priced handpiece:
TT
HANDPIECE
 A$119

BUDGET PRICED DSM2 3 x CH R/C TX
Used for Trackside R/C. 
Can control 2 x base units.
Tx handpiece shown will have a different label.
Base unit can also be used with any other RCS TX handpiece if you already have one.
CAB "B" can also control a 2nd base unit.
Using block control, operate train on mainline & simultaneously switch yards.
Crest In Line PWM to Linear DC converter.
57091
 A$49

Must be used if the TITAN Trackside will be powering DCC equipped locos.

The System must use a regulated DC Switchmode Power Supply.
The power supplies below are only suitable for use in Australia.
Not available via the Pay Pal cart.  Order direct from RCS.
MP3800 $149 0 - 24 volt 18 amp switchmode supply.
Overload & Short circuit protected.
MP3490 $30 2.5 amp switchmode.
12 volts for "N" scale
MP3492 $30 2 amp switchmode. 
15 volts for "H0" scale
MP3246 $60 3.42 amp switchmode. 
19 volts for "0" scale
M8973 $99 5 amp switchmode. 
24 volts for "G" scale
P8438 $8 IEC power cable
to suit M8973 & MP 3246
Switchmode power supplies similar to the above are sold Wordwide.