BASIC 6 CHANNEL AUTO BIND DSM2 Rx's.
LIVE STEAM & BATTERY R/C 
LOCOS.  April 1st 2021
 
DSM2/DSMX AUTO BIND RECEIVERS.
FEATURE LM0034-E LM0034-T AB-EM AB-TM RX107v2-E RX107v2-T
DISABLED
FAILSAFE
YES YES YES YES YES YES
AUTOMATIC
BINDING
 YES YES YES YES YES YES
DIRECTIONAL
F & R LIGHTING
NO NO YES YES YES YES
SERVO
REVERSING

NO NO NO NO YES YES
SERVO E POINT ADJUSTABLE
NO NO NO NO  YES YES
LIST PRICE A$ 29
A$ 29  A$ 29 A$ 29
A$ 39 A$ 39

2.4 GHz receivers
BASIC Rx's have a servo reverser available if needed.
ONLY A$ 29 EACH. GB £16. US $ 22. (Until sold out)

   

NOW AVAILABLE.
BASIC 6 CHANNEL AUTOMATIC BIND RECEIVERS
.
 
LIST OF FEATURES

  * AUTOMATIC BINDING.
  * DISABLED FAILSAFE.
  *
CLEAR HEATSHRINK PROTECTED. 
  * SUITS LIVE STEAM R/C & BATTERY R/C AS IS.
  * ALL CHANNELS OUTPUT 100% (90°) SERVO THROW.


INTERMEDIATE NON ADJUSTABLE RX'S ARE HERE
 
FULLY ADJUSTABLE RX'S ARE HERE
 
Model Price Image Description
AUTOMATIC BIND (A-B) Rx'S NOW AVAILABLE.
IDEAL FOR BATTERY R/C & LIVE STEAM.
No servo reversing.  # SIG-REV is available.
LM0034-E
A$29 (L)
US$ 21
Xenon Auto Bind Rx's with Dual 10 cm Diversity antennas.  End Mount pins.
PDF Instruction Manual @ 10/10/20
LM0034-T
A$29 (L)
US$ 21
Xenon Auto Bind Rx's with Dual 10 cm Diversity antennas. Top Mount pins.
PDF Instruction Manual @ 10/10/20
BATTERY REQUIREMENTS
The above receivers can use 4 x AA or AAA re-chargeable cells. (4.8 volts nominal).  However, if the battery voltage sags below 4.6 volts, erratic behaviour can occur.
For the best and most reliable performance we suggest at least welded packs of
4 or 5 x AAA rechargeable cells. Plastic holders & Alkaline cells not recommended. 
Alternatively you can use a # UBEC-5v regulator pcb and higher voltage batteries. Voltage range = 4.8 - 6.0 volts.
Rx batteries are not needed with ESC's. The ESC provides the 5 volt supply.
U-BEC-5v $15 (L) BEC 3.0 Amp 5 volt supply for heavy duty servo use.  Very useful if using MyLocosound in Live Steam locos.  A  7.4 volt pack is ideal.
(Instruction manual)
IF R/C TRIGGERS ARE REQUIRED,
THE INSTRUCTIONS HAVE AN APPLICATION GUIDE.
  
 
Model Price Image Description
EXTRA SERVO REVERSERS
Reverses any one servo that is backwards.

OK with Hi-Tec & Dual Sky servos. Useful when two servos are working together on one signal.
Needed if one servo throw is backwards relative to the other engine. 
E.G. Garratt type locos. 
FOR LIVE STEAM MAXIMUM 6.0 VOLT NOMINAL.
SIG-REV
A$5 (L)
US$ 3
For use with 4 x dry cells or
5 x rechargeable batteries.
IN LINE pins.
Made in China.
OTHER SERVO REVERSERS & THROW ADJUSTERS
MRW-11
$ 24 (L)
US$16
END POINT EXPANDER & REVERSER.
Reverse servo & adjust servo centre + end points from 90o full throw to 180o full throw.
35 mm x 18 mm x 7 mm  PDF Instructions
HANDY PLUG IN DEVICE FOR MEASURING PULSE WIDTH.
PULSE-MEASURE
A$29 (L)
US$20
Simply plug into any channel to measure the PWM of servo signal.
 
CLICK HERE FOR INFORMATION ON LIVE STEAM SERVO, BATTERIES & PARTS.  
 

FOR BATTERY R/C LOCOS.
USE AS IS.  THE
5 VOLT ESC OUTPUT POWERS THE R/C.
NO OTHER R/C BATTERIES NEEDEDED.

COMPATIBLE WITH ALL CENTRE OFF & LOW OFF ESC's.
IDEAL FOR USE WITH FOSWORKS "COBRA-160 & COBRA
-260" ESC's WHICH HAVE DIRECTIONAL CONSTANT BRIGHTNESS LIGHTING OUTPUTS.
CLICK HERE FOR A LIST OF PLUG IN R/C SWITCHES FOR SOUND TRIGGERS.