PARTS & SERVOS FOR LIVE STEAM LOCOS.  
Mar 1st 2018

  Remote Control Systems (RCS)

A SELECTION OF Rx BATTERIES, SWITCHES, R/C SWITCHES, CABLING, SERVOS, & E SWITCHES.
‚Äč
Model Price Image Description
HYBRID NiMh-ALKALINE LOOSE CELL RE-CHARGEABLE BATTERIES
See below for suitable battery holders.
LSD-AAA
$ 33 (L)
Pack of 4 x fully charged AAA ENELOOP
LSD hybrid batteries.
Ideal if you plan on using AAA size battery holders.
Please use only with locos up to 1 amp current drain.
LSD-AA
$27 (L) Pack of 4 x fully charged AAA ENELOOP
LSD hybrid batteries.
Ideal if you plan on using AA size battery holders.
Please use only with locos up to 1 amp current drain.
DUAL OUTPUT Tx & Rx BATTERY CHARGER
RX-CHARGER $29

Mains powered 4.8 volt charger for the above batteries.
Charge lead plugs into the HT-7215 ON-OFF switch assembly.

ALKALINE LOOSE CELL NON RE-CHARGEABLE BATTERIES
See below for suitable battery holders.
SB2413
$  4 (L) LOW COST QUALITY
1.5 volt AAA Alkaline batteries pack of 4.
S4955B
$  4 (L) LOW COST QUALITY
1.5 volt AA Alkaline batteries pack of 4.
ON - OFF SWITCH & BATTERY HOLDERS.
Plug and socket connections.
HT-7215
$10 (L)
Hi-Channel ON-OFF switch with standard 3 position 2 wire connections.
Includes an externally accessible charger lead.
4-AA-BRICK
A$6
Hi Channel Battery holder holds 4 x AA size batteries in a square brick format. With a standard 3 place RX battery plug.
4-AA-TS  A$6 (L)
Holds 4 x AA size batteries in a Twin Stick
 format.  Small size for small locos.
With standard RX battery plug.
 4-AAA-FLO
A$10 (L)
Holds 4 x AAA size batteries in a FLat Open
 format.  Small size for small locos.
With standard RX battery plug.
4-AA-FLO
A$10 (L) Holds 4 x AA size batteries in a FLat Open format.  Flat holder for under roof etc.
With standard RX battery plug.
EXTRA WIRING AIDS.
HT-7342
A$4 (L)
Plug in 3 wire servo lead.  Can be used for lights, sound triggers etc. 
SL-6-Ex
A$3 (L)  6" extension servo lead. Used where RX is separated from the servos.  EG Tender locos.
SL-12-Ex
A$8 (L)  12" extension servo lead. Used where RX is separated from the servos.  EG Tender locos.
SL-2-WayS
A$6 (L)  6" Short parallel connector Y cable to drive two servos from one RX output.  Useful for Garratt type locos.
SL-2-WayL
A$8 (L)   12" long parallel connector Y cable to drive two servos from one RX output.  Useful for Garratt type locos.
SL-3-Way
A$12 (L) 3 way servo lead splitter.
Ideal for use with 7-Ch-Rx for servo channel, battery supply and binding plug in one socket.
MICRO & MINI SERVOS.
HS-45HB
A$35 Hi-Tec® micro servo with Karbonite gears & BB shaft for long life.   Use # 9g-S-Brack.
The servo used for the K1 Loco regulator.
 HS-65MG
A$49  Hi-Tec® micro servo with metal gears & BB shaft for long life.   Use # 9g-S-Brack.
The standard servo used by Argyle Loco.
HS-82MG
A$35  Hi-Tec® mini servo with metal gears for long life. 
Use # 16g-S-Brack.
The servo recommended by Accucraft for the NA.
HS-85MG
A$49 Hi-Tec® mini servo with metal gears & BB shaft for long life. Use # 16g-S-Brack.
The standard servo used by Argyle Loco.
TP-MG90S
A$10 TOWER PRO MG90S
Low cost metal gear servo.  Same size as HS82MG.  Use # 16g-S-Brack.
My experience shows they are reliable.
SERVOS BRACKETS IN STOCK.  Made by Small Parts CNC in the USA.
Aluminium is drilled & tapped.  Screws supplied.
Holes drilled and screws supplied or flat sticking surface for mounting in a loco.
9g-S-Brack
A$ 11 (pr) Suits HXT900, TP SG90, HiTec HS-55,
HiTec HS-65MG, HiTec HS-65HB &
Airtronics 94809
16g-S-Brack
A$ 15 (pr) Suits HiTec HS-82MG, HS-85MG & TP-MG90s servos.
SINGLE SERVO REVERSER FOR LIVE STEAM LOCOS.
SIG-REV
$ 9 (L)

Small inline device that reverses one servo signal.  Needed if servo throw is backwards.
Saves reversing the servo in linkages.
WARNING !! OK only up to HS82MG.
Very useful with
Kadee© servo uncouplers.

SERVO REVERSER FOR USE WITH TWO SERVOS IN LIVE STEAM LOCOS.
SIG-REV-DUAL
$ 12 (L) Reverses one servo when two servos are working together on one signal.  E.G. Garratt type locos.  Needed if one servo throw is backwards relative to the other engine. OK with Hi-Tec HS82MG.
Saves reversing the servo in linkages.
HEAVY DUTY "Y" CABLE WITH ONE REVERSER FOR DUAL SERVOS.
SIG-REV-HD
$ 17

Heavy duty "Y" cable with built in servo reverser.
Suitable for use with Garratt type locos where reversing the servo of one engine of the two is required, to maintain the operating relationship of the engines at each end of the loco.

PLUG IN SOUND TRIGGERS AND FUNCTION CONTROLS.
R/C SWITCHES THAT ARE PROGRAMMABLE FOR MOMENTARY or LATCH ON - OFF.
RELAY CONTACTS FOR TRIGGERING LGB SOUND SYTEMS THAT HAVE REED SWITCHES.
25 mm x 13.5 mm x 12 mm.
MRW-RSS
$29 (L) Relay Single Switch.
# MRW-RSS provides 1 x
1 amp trigger control functions for any channel used.
PDF Instructions
MRW-RDS
$39 (L) Relay Dual Switch.
# MRW-RDS provides 2 x 1 amp trigger control functions for any channel used.
PDF Instructions
SOLID STATE CONTACTS FOR TRIGGERING SOUND SYTEMS THAT CAN USE TRANSISTORS.
MRW-SSDS
$29 (L) Solid State Dual Switch.
# MRW-SSDS provides 2 x
3amp trigger control functions for any channel used. 
2 x = 4 functions.  Lights ON-OFF.
PDF Instructions
MRW-SSQS
$49 (L) Solid State Quad Switch.
# MRW-SSQS provides 4 x
3amp. trigger control functions. 2 ea on any 2 chs. 30 mm x 25 mm x 12 mm. 2 x = 8 functions. Switch lights ON-OFF.
PDF Instructions
SOLID STATE POWER "ON" SWITCH
E-SWITCH
$12 (L)

Single Electronic Switch.  Any spare Channel turns on RX battery voltage supply up to 2 amps.
Cannot be used for sound triggers.