ALL NEW SMALLER SIZED DSM2 TX'S
FOR LIVE STEAM & BATTERY R/C LOCOS.  Aug 1st 2016

  Remote Control Systems (RCS)

LIVE STEAM & BATTERY R/C
Ultra small sized full function TX handpiece select from the # TX-1, TX-3, TX-5, TX-7 or TX-9 handpieces.
For Live Steam locos with more than two servos, we recommend the TX-5 or TX-9.
Bind as many locos as you wish to one TX hand piece.

All Tx handpieces feature a large knob for one hand thumb control of the steam regulator or
Speed and Direction of a battery powered ESC.

If your current live steam locos are equipped with Spektrum, Lemon  or Orange DSM2 compatible R/C
and the servo reversing switch is set to normal, you can simply replace the big stick TX's
with our # TX-1, TX-3, TX-5, TX-7 or TX-9 pocket sized alternatives.
Non DSM2-DSMX compatible locos will also require a new RX.
However, you can still use old servos and battery harness etc.

 
 
Model Price Image Description

2.4 GHz 3 & 5 CHANNEL RADIOS (Servos not inlcuded).
Infinitely adjustable 90º valve gear servo.  Set small knob to desired direction and cut off.
300º knob for 90º control of the steam regulator.
No servo reversing.  Use # Rx102-1(AB) RX's or # SIG-REV.
RCS TX's are marked CE and are FCC compliant, but not tested or approved.
All Tx handpieces require a regular PP3 9 volt battery.  Battery life = 20 hours plus.

DU-TX-1 has 2 x Digital Proportional servo controls. 
Plus 1 x snap action servo channel.

 DU-TX-3 has 2 x Digital Proportional servo controls. 
Plus 3 x snap action servo channels or sound triggers.

DU-TX-5 has 4 x Digital Proportional servo controls.
Plus 1 x snap action servo channel. Great for draincocks, blowers & gas controls etc.

DU-TX-7 has 2 x Digital Proportional servo controls.
1 x snap action servo channel plus 4 x 1/2 servo movement functions or 5 x Sound Triggers.

DU-TX-9 has 3 x Digital Proportional servo controls.
1 x snap action servo channel.  Plus 2 x 1/2 servo movement functions or 3 x Sound Triggers.
  

ALL TX's can also be used with "LOW OFF" & "CENTRE OFF"  ESC's for battery R/C.
(Click the pictures for full information)
pdf instructions

DU-TX-1
A$129 LIVE STEAM BASIC DSM2 3 x Ch R/C Tx.
Designed for both entry level Live Steam and experienced operators.
Control Johnson Bar, Regulator &
1 x Snap action servo functions.
BATTERY R/C. Ideal for basic battery R/C.
Control Speed/Direction.
1 x sound trigger.

DU-TX-3

A$139

LIVE STEAM BASIC DSM2 4 x Ch R/C Tx.
Designed for both entry level Live Steam and experienced operators.
Control Johnson Bar, Regulator &
1 x Snap action servo functions.

BATTERY R/C. Ideal for basic battery R/C.
Control Speed/Direction.
3 x sound triggers.

DU-TX-5

A$149

LIVE STEAM DSM2 5 x Ch R/C Tx.
Designed for Live Steam locos that require controlling Johnson Bar, Regulator, Drain Cocks, Blowers & gas Control etc.
Proper fully proportional Whistle function.
1 x Snap action servo functions.
Not suitable for Battery R/C.

DU-TX-7

A$169

DSM2 R/C for 2 x servo Live Steam locos.
Use with any DSM2 compatible RX including the DSM2-EM(AB) 5 channel RX below.
1 x Snap action Whistle function.
4 x 1/2 servo movement functions.
IDEAL FOR BATTERY R/C LOCOS.

Control Speed/Direction.
5 x sound trigger functions.

DU-TX-9
A$169 LIVE STEAM DSM2 R/C for 3 x servo locos.
Use with any DSM2 compatible RX.
Independently control 2 x banking locos.
Fully proportional Whistle function.

3 x 1/2 servo movement functions.
GREAT FOR BATTERY R/C LOCOS.
Control Speed/Direction.
3 x sound trigger functions.
PRICES FOR ABOVE ITEMS WILL BE CHARGED IN THE A$ EQUIVALENTS.
SB2423
A$ 4

LOW COST QUALITY
9 volt PP3 Alkaline batteries for TX handpieces.
Cannot be posted overseas.

 
 
Model Price Image Description
2.4 GHz 5-6 CHANNEL RADIOS (Servos not inlcuded).
AUTOMATIC (AB) BINDING DSM2 RX's.
Programmable for Live Steam servo direction & end points.

No Failsafe.  Turn off TX to cruise at last servo setting.
Built in Forward and Reverse LED lighting outputs.

Video of how to adjust the Rx102-1 servo settings courtesy of Peckferton Light Railway
Video of how to re-program the Rx102-1 pin usages courtesy of Peckferton Light Railway

Rx102-1(AB)
A$55 Deltang Rx102-1 w/Automatic Bind.  RX can be in metal loco body. Range may be reduced.
pdf instructions updated Feb 11 2018.
Rx102-1(AB)LR
A$59 Long Range Deltang Rx102-1 w/Automatic Bind.  RX can be in metal loco body with the shielded antenna tip exposed for extra range.
pdf instructions updated Feb 11 2018.
LT-SW
A$19 Plug in Transistor switching unit that can handle incandescent bulbs and relays for switching USAT locos wiring plus Bachmann & Aristo locos with the fitted Plug'N'Play pcb's.
PLUG IN TEST LED.
ONLY TO BE USED WITH ABOVE RX's.
LED-REP
A$ 6 (L) Highly desirable if not using LED lights.
3 mm green LED on a plug in cable used as an external repeater for the pcb LED light when the RX is buried in a metal loco.  For programming etc.
PLUG IN LEDS FOR DIRECTIONAL CONSTANT BRIGHTNESS LIGHTING.
ONLY TO BE USED WITH ABOVE RX's.
LED-3mm-WW
A$10 (L) Warm White 3 mm High Intensity LED on a plug in cable.  Follows Front & Rear direction.
Use for reference when programing.
LED-5mm-WW
A$10 (L) Warm White 5 mm High Intensity LED on a plug in cable. Follows Front & Rear direction.
Use for reference when programing.
 
 
Model Price Image Description
2.4 GHz 5-6 CHANNEL RADIOS (Servos not inlcuded).
LOW COST!!! MANUAL BINDING DSMX/DSM2 RECEIVERS
No Failsafe. No lighting outputs. See below.
DSM2-EM-Mini-V2
A$22 (L) Lemon brand 6 Channel DSM2 RX that is smaller than most standard 2.4 GHz RX's.
PDF Instruction manual
DSM2-RA-Mini-V2
A$22 (L) Lemon brand 6 Channel DSM2 RX that is smaller than most standard 2.4 GHz RX's.
Ideal for Thomas & Friends.
PDF Instruction manual
MRW-SSLS
A$29
Solid State Lighting Switch.
Provides 2 x Lighting controls. Can be used with any spare channel for manual control.
A "Y" cable is supplied to read direction of
Ch # 1 or Ch # 3 to change lighting direction automatically.
Lights are ON before loco moves.

SERVO REVERSER FOR USE WITH SERVOS IN LIVE STEAM LOCOS.
SIG-REV
$ 12 (L) Reverses any one servo that is backwards.
Useful when two servos are working together on one signal.  E.G. Garratt type locos.  Needed if one servo throw is backwards relative to the other engine.  OK with Hi-Tec HS82MG.
Saves reversing the servo in linkages.
BINDING PLUG WITH SPST PUSHBUTTON.

BINDER

A$10 (L) Plug in Pushbutton assembly to enable external control of "Binding".
 

CLICK HERE FOR INFORMATION ON CENTRE OFF BATTERY POWERED ELECTRONIC SPEED CONTROLLERS.