A SELECTION OF ELECTRICAL PARTS & GENERIC INSTALLATION KITS.
USE WITH ANY BRAND OF RADIO CONTROL.

 
CLICK ON THE PICTURES FOR MORE DETAILED INFORMATION,
INCLUDING PDF FILES OF WIRING INSTRUCTIONS.

 
Click here to convert currency.

Model Price Image Description
LOCO SPECIFIC INSTALLATION KITS 
INSTALLATION KITS WITH LOCO SPECIFIC INSTRUCTIONS.
CAN BE USED WITH ANY BRAND OF R/C
BIK-ANNIE
A$39

3 amp installation kit for the
Bachmann
® Big Hauler 4-6-0 (ANNIE)
Instruction manual pdf

BIK-CONNIE
A$39

3 amp installation kit for the
Bachmann
® Spectrum 2-8-0 (CONNIE)

Instruction manual pdf

BIK-K27
A$45 Installation kit for the Bachmann® K-27.
Provides Fused ON-OFF switch, pre-wired charge jack & a Phoenix/Sierra volume control.
USA TRAINS PLUG-IN KITS.
BIK-USAT
A$39 Simplified Installation kit for all USAT® diesels.
JST Connectors supplied for easy wiring of the stock USAT® pcb's. Use with any R/C & ESC's.
PDF Instructions
MRW-RDS
A$33 Plug-In prewired directional lighting relay kit.
Uses # MRW-RDS to parallel direction channel.

MANUALLY control direction of loco lghting.
Shown with parts fitted from # BIK-USAT kit.
RELAY-1v3
$19
1 amp 12 volt relay. 12 v -  24 v
AUTOMATICALLY reverses polarity of loco wiring to control directional lighting
Shown with parts fitted from # BIK-USAT kit.

 

Model Price Image Description
INSTALLATION KITS 
PARTS
S1350
A$3 (L) 5 amp DPDT pcb mount switch.
ON - ON
S1345
A$3 (L)

5 amp DPDT switch with solder tags.

MOM - OFF - MOM.

Second hand. Checked and OK.

S1333
A$3 (L) 5 amp SPDT Mom-off-Mom switch.
Used for sound system volume control.

U300

A$2 (L) 3 amp Polyswitch auto reset chemical fuse.
P0622
A$3 (L) 2.1 x 5 mm in line co-ax jack.
P0623
A$3 (L) 2.5 x 5 mm in line co-ax jack.
PCB MOUNTED BATTERY R/C INSTALLATION KITS.  With generic instructions.
For use with RCS chargers or the # AUX-BAT harness. 
ALL KITS SUPPLIED FITTED WITH JST® CONNECTORS AND POLYSWITCH® FUSES.
Trail Car installation kits
BIK-TC1
$27 (L) Fit pcb in the doorway of an "0" or Largescale boxcar.  1-2 amps fused, screw terminals,
charge jack, On-Off switch &
1 x pairs of JST cables. PDF Instructions

BIK-TC3

A$29 (L) 3 amp Universal Battery Installation Kit.
  Slide Switch.  2.5 MM plug in charge lead.

Low Profile.  Terminals on top.
Ideal for "Trail Car" doorway installation.
1 x pair of JST cables. PDF Instructions 15/9/20
BIK-TC6 A$33 (L)  SUPPLIED WITH # U-BIK-6A
Ideal for "Trail Car" doorway installation.
+ JST CABLES For trail car to Loco.
Budget priced Trail Car installation components.
Simple plug together using R/C Servo connectors.
3 amp Polyswitch© Fuse.
P-SWITCH
A$12 (L)
3 amps Battery ON-OFF slide switch.
Fitted with standard Futaba/JR connectors. Built in charge point and LED indicator.  Glue in place for trail car or
34 mm x 15 mm hole. Easily change output to suit ESC's using JST connectors.
2 x FUT-FUT
$ 10 2 x Futaba cable to Futaba cable puts welded R/C battery packs in series, to increase volts. 9.6 volts - 12 volts
For use with # P-SWITCH
2 x FUT-JST
$ 10 2 x Futaba - JST cable puts welded R/C battery packs in series, to increase volts.
9.6 volts - 12 volts
Use with all  RCS # U-BIK-xx kits.
3 x FUT-JST
$ 15 3 x Futaba - JST cable puts welded R/C battery packs in series, to increase volts.
14.4 volts - 18 volts
Use with all  RCS # U-BIK-xx kits.
FF-JM
$ 5 Futaba Female - JST Male.
Allows above packs to be used with RCS Loco installations with JST loco cabling.
JF-FM
$ 5 JST Female - Futaba Male.
Allows bateries with JST connectors to be used with 
# P-SWITCH
JST-"Y"
$ 5 Pic Soon JST "Y" Splitter Cable. 1 x Female - 2 x Males Adds power supply for sound systems etc
SYSTEM PROTECTION IN-LINE FUSES
JST-FUSE
$10 (L) 3 amp In line fuse to protect batteries and wiring with JST Connectors.
Inexpensive system protection.
FUT-FUSE $10 (L) 3 amp In line fuse to protect Rx, batteries and wiring using Futaba/JR Connectors.
Inexpensive system protection.
On Board Loco installation kits. Using JST connectors.

U-BIK-3A

A$29 (L) 3 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on switch side.
1 x pair of JST cables.  PDF Instructions
U-BIK-3B A$29 (L) 3 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on the reverse side.

1 x pair of JST cables.   PDF Instructions

U-BIK-6A

A$33 (L)  6 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on switch side.
1 x pair of JST cables.   PDF Instructions
U-BIK-6B A$33 (L)  6 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on the reverse side.
1 x pair of JST cables.   PDF Instructions

PDB 

A$19 (L) Very useful 33 mm x 20 mm pcb.
Add extra battery voltage terminals for sound systems, LED's etc. 2 x wires in = 10 wires out.
5 x pairs of 100 mm JST Cables supplied.
No instructions.  Refer to PDB use
Plug 'n' Play installation kits for Aristocraft® & Bachmann® locos equipped with a PnP socket and allows any brand of R/C to control them. 
JST Plugs & sockets to match those fitted to RCS Parts & ESC's available separately.
The same kit is used for both types.  Minor wiring changes required for AristoCraft.
BATT-PnP A$19 (L) Simplified Battery only 3 amp Plug'n'Play adaptor for the standard PnP sockets.
JST cables. Fuses not supplied.
PDF Instructions
THE FITTED JST CONNECTORS ARE DESIGNED TO PLUG'n'PLAY WITH OTHER RCS PARTS. IF NOT USING OTHER BRANDS THAT DON'T HAVE JST CONNECTORS, SIMPLY CUT THE UNWANTED PARTS OFF AND DISCARD.
JST-100
A$15 (L)  Four pairs of small JST two way in line connector cables.
300 mm Silicone multi strand leads.
JST-300
A$15 (L)  Four pairs of small JST two way in line connector cables.
100 mm Silicone multi strand leads.

 

Model Price Image Description
OPERATION ENHANCERS
RELAY-1v3
$19 (L) 1 amp 12 volt relay. 12 v -  24 v
Can be used to reverse polarity of loco wiring to save a lot of rewiring.
PDF Instructions
RELAY-5

$19 (L) 1 amp 5 volt DPDT relay
Use a 4 -8 volt supply & the reverse lighting output of a # COBRA-260 & or OMEGA-10.

PDF Instructions
RELAY-12

$19 (L) 1 amp 12 volt DPDT relay
Use a 8 -15 volt supply & the reverse lighting
output of a # COBRA-260 & or OMEGA-10.
PDF Instructions
RELAY-24

$19 (L) 1 amp 24 volt DPDT relay
Use a 18 -28 volt supply & the reverse lighting output of a # COBRA-260 & or OMEGA-10.

PDF Instructions
REV-LT
A$19 (L) Motor Output voltage monitor.
Works with any brand of R/C ESC.
Switches diirectional lights ON and OFF.
REG-5
A$18 (L) 1 amp 5 volt regulator.
REG-12
A$18 (L) 1 amp 12 volt regulator.
SSI-9
A$21 (L) Required by Sierra sound for use with ESC's that have PWC (PWM) output.
PDF Instructions
       

GO HERE FOR INFORMATION ABOUT LIVE STEAM PARTS & SERVOS ETC.
GO HERE FOR BATTERY R/C LOCO SUPPLIES.

 
Back to the RCS Home