BUDGET PRICED BATTERY POWERED R/C

DSM2 3 x CH R/C TX
For controlling Battery R/C locos. 
Small size with easy to use controls that will suit younger operators.
One handpiece for all locos.  Swap locos between operators.
Speed & direction on one knob. 
3 x sound triggers. (Requires extra parts).
 SELECT FROM FOUR Tx HANDPIECES.
THEY ALL WORK THE SAME WITH DIFFERENT COMBINATIONS OF KNOBS AND BUTTONS.

EVO-BATT v a
EVO-BATT v b
EVO-BATT v c
EVO-BATT v d
$99 $99 $99 $99

 

APART FROM THE TX HANDPIECE, ENTRY LEVEL USERS WILL REQUIRE:
1 x DSM2-Mini Rx with either End Mount or Right Angle mount servo pins.
1 x VIPER ESC.  Either  6 amp 15 volt or 6 amp 24 volt. 
1 x Installation kit with ON - OFF switch, fuse and charge jack.

1 x Up to 15/24 volt battery pack that will fit, depending on ESC.

 

Model Price Image Description
2.4 GHz 5-6 CHANNEL RADIOS (Servos not inlcuded).
LOW COST!!! MANUAL BINDING DSMX/DSM2 RECEIVERS
No Failsafe means you can turn OFF Tx and cruise.
Channel # 1 is used for ESC control.  Channel # 3 is used for two sound triggers.
Channel # 5 can be used for Kadee  uncoupling.
DSM2-EM-Mini-V2
$22 (L) Lemon brand 6 Channel DSM2 RX that is smaller than most standard 2.4 GHz RX's.
PDF Instruction manual
DSM2-RA-Mini-V2
$22 (L) Lemon brand 6 Channel DSM2 RX that is smaller than most standard 2.4 GHz RX's.
Ideal for Thomas & Friends.
PDF Instruction manual
BINDING PLUG WITH SPST PUSHBUTTON.

BINDER

$10 (L) Plug in Pushbutton assembly to enable external control of "Binding".  200 mm.
ESC's AVAILABLE.
VIPER-10-15
$49 (L) Use 7.2 v to 15 volts. Up to 6amps.
Basic PDF instructions
READ THE FULL SPECS
VIPER-10-24
$69 Use 12 v to 24 volts.  Up to 6 amps
Basic PDF instructions
READ THE FULL SPECS
VIPER-40-24
TBA Use 12 v to 24 volts.  Up to 12 amps.
READ THE FULL SPECS

COMING SOON.
BASIC INSTALLATION KITS
BIK-U3A
$29  3 amps Battery Installation Kit.
  Prewired 2.5mm charge jack.
Low Profile.
  Terminals on top.
BIK-U6A
$33  6 amp Battery Installation Kit.
   Prewired 2.5mm charge jack.

Low Profile.  Terminals on top.
BIK-U3B
$29  3 amp Battery Installation Kit.
  Prewired 2.5mm charge jack.

Ideal for box cars.  Terminals on back.
BIK-U6B
$33  6 amp  Battery Installation Kit.
  Prewired 2.5mm charge jack.
AUTOMATIC LIGHTING CONTROL
REV-LT
$19 (L) Motor Output voltage monitor.
Works with any brand of R/C ESC.
Analyses motor polarity and switches
AUTOMATIC Front & Rear lights.  100 ma ea.
PDF instructions

 

USERS WANTING SOUND SYSTEM TRIGGERS WILL REQUIRE:
1 x Suitable sound system with speaker.
1 x R/C switch. To trigger sound functions.
1 x # SIG-REV servo reverser needed for Kadee© servo uncouplers.

 

Model Price Image Description
PLUG IN SOUND TRIGGERS AND FUNCTION CONTROLS.
R/C SWITCHES THAT ARE PROGRAMMABLE FOR MOMENTARY or LATCH ON - OFF.
2-W-S
$39 (L) Solid State 2-Way-Switch provides 2 x trigger control functions for any channel used.
Switch lights ON-OFF up to 50 ma.
MRW-RS
$29 (L) Relay Single 1 amp switch.
# MRW-SRS provides 1 x trigger control functions for any channel used.
25 mm x 13.5 mm x 12 mm.
MRW-SSD
$39 (L) Solid State Dual 3amp # MRW-SSD provides 2 x trigger control functions for any channel used.
25 mm x 13.5 mm x 12 mm.
2 x = 4 functions. Switch lights ON-OFF.
MRW-SSQ
$49 (L) Solid State Quad 3amp # MRW-SSQ provides
4 trigger control functions. 2 ea on any 2 chs.
25 mm x 25 mm x 12 mm.
Also switch lights ON-OFF.
PLUG IN POWER ON - OFF SWITCH.
E-SWITCH
$12 (L) Single electronic switch.  Any spare Channel turns RX battery voltage supply ON - OFF.
Cannot be used for sound triggers.
PLUG IN SERVO SIGNAL REVERSER.
SIG-REV
$ 8 (L) Small inline device that reverses the servo signal.  Needed with Kadee© servo uncouplers.
9 VOLT Tx HANDPIECE BATTERY.
SB2423
$ 4 LOW COST QUALITY
9 volt PP3 Alkaline batteries for TX handpieces.
Cannot be posted overseas.
GO HERE FOR OTHER 2.4 Ghz DSM2 TX HANDPIECES & RX's.
GO HERE FOR SUITABLE BATTERIES & CHARGERS.
GO HERE FOR OTHER INSTALLATION KITS.
GO HERE FOR CONNECTORS.