BUDGET PRICED BATTERY POWERED R/C

For controlling CENTRE OFF ESC Battery R/C locos only. 
Small size with easy to use controls that will suit younger operators.
Run two locos at the same time from 1 x handpiece.
Only one handpiece needed for all locos.  Swap locos between operators.
N.B. KNOB DESIGN MAY VARY.
COMPATIBLE WITH DUAL USE HANDPIECES.
DUO DUO+
2 X DIGITAL PROPORTIONAL.
1 x SOUND TRIG.
$129

US $107
 2 X DIGITAL PROPORTIONAL.
5 x SOUND TRIGS.
$169

US $116
 PDF INSTRUCTIONS PDF INSTRUCTIONS
CLICK HERE FOR INFORMATION ON WHAT EACH Tx DOES & WHICH IS BEST FOR YOUR NEEDS. 
For Battery R/C we recommend VIPER & COBRA "Centre OFF" ESC's.

 

APART FROM THE TX HANDPIECE, ENTRY LEVEL USERS WILL REQUIRE:
1 x DSM2 Rx with either End Mount or Right Angle mount servo pins.
1 x VIPER or COBRA ESC.  Either  6 amp 12 volt or 6 amp 24 volt. 
1 x Installation kit with ON - OFF switch, fuse and charge jack.
1 x Up to 12/24 volt battery pack that will fit, depending on ESC.

 

 The simplified wiring diagram requires 2 x # MRW-SSDs (or a single # MRW-SSQS),

plus an # EVO-GAMMA handpiece which has 4 x sound triggers.
(Pic courtesy of MyLocosound)

Model Price Image Description
2.4 GHz 5-6 CHANNEL RADIOS (Servos not inlcuded).

LOW COST!!! MANUAL BINDING DSMX/DSM2 RECEIVERS
No Failsafe means you can turn OFF Tx and cruise.

All Rx's are the same size. 30 mm x 18 mm x 12 mm.
For the DSM2 EM Mini End mount servo pins allow for servo plugs.
Channel # 1 is used for ESC control.  Channel # 2 is used for two sound triggers.
Channel # 5 can be used for another sound trigger such as the new
MyLocosound Lite Diesel engine Start - Stop  effect. Just add 1 x # MRW-RSS.
EXTRA LONG RANGE Rx's.
DSM2-EM-DIV
 $39 (L)
US $26		 Long Range Lemon w/Diversity antennas.  RX can be in metal loco body with the shielded antenna tips exposed.   End Mount pins.
Supplied with # BINDER for external binding.
PDF Instruction manual
LOW COST STANDARD DSM2 Rx's.
DSM2-EM
 		$22 (L)
US $16
 Lemon brand 6 Channel DSM2 RX that is smaller than most standard 2.4 GHz RX's.
PDF Instruction manual
DSM2-RA $22 (L)
US $16
 Lemon brand 6 Channel DSM2 RX that is smaller than most standard 2.4 GHz RX's.
Ideal for Thomas & Friends.
PDF Instruction manual
BINDING PLUG WITH SPST PUSHBUTTON.
BINDER
$10 (L)
US $8
 Plug in Pushbutton assembly to enable external control of "Binding".  200 mm.
DUAL CONSTANT BRIGHTNESS FORWARD & REVERSE LIGHTING R/C SWITCH.
Power by R/C BEC or Traction batteries. Provides 2 x Lighting controls.
 Can be used with any spare channel for manual R/C control.
Plugs In-Line and reads direction of Ch # 1 or Ch # 3 to change lighting direction automatically.
MRW-SSLS

$36 (L)
US $26

 Solid State Lighting Switch.
Lights are ON before loco moves.
PDF Instructions
ESC's AVAILABLE.
VIPER-10-12
 $49 (L)
US $35
 Use 7.2 v to 12 volts. Up to 6amps. 10 Amp peak.
Basic PDF instructions
READ THE FULL SPECS
COBRA-160 $79 (L)
US $57
 6 volts to 24 volts.  5 amps - 14 amp peak.
30 Watts continuous.
45 mm x 20 mm x 10 mm. Plug in JST cables.
PDF instructions
VIPER-20-24
 $89
US $71

Use 12 v to 24 volts.  Up to 12 amps. 20 amp peak.
READ THE FULL SPECS

Includes Tamiya connector for batteries
and prer-wired bullets for the motor(s).
Plug 'n' Play installation kits for Aristocraft® & Bachmann® locos equipped with a PnP socket and allows any brand of R/C to control them. 
Complete with JST Plugs and sockets to match those fitted to Cobra & Viper ESC's.
Be sure to order the correct kit as the wiring is slightly different.
BATT-PnP-AC A$19 (L)
US $14		 Simplified Battery only 3 amp Plug'n'Play adaptor for the standard AristoCraft socket.
Fuses not supplied.
PDF Instructions
BATT-PnP-BM A$19 (L)
US $14
 Simplified Battery only 3 amp Plug'n'Play adaptor for the standard Bachmann socket.
Fuses not supplied.
PDF Instructions
TRAIL CAR INSTALLATION KITS
BIK-TC1
 $27 (L)
US $19
 Fit pcb in the doorway of an "0" or Largescale boxcar.  1 amps fused. Screw terminals.
With charge jack and On-Off switch.
PDF Instructions
BIK-TC3 A$39 (L)
US $28
 3 amp Universal Battery Installation Kit.
  Slide Switc.  2.5 MM plug in charge lead.
Low Profile.  Terminals on switch side.
Ideal for "Trail Car" doorway installation.
PDF Instructions
BIK-TC6 A$45 (L)
US $32
 6 amp Universal Battery Installation Kit.
  Slide Switch.  2.5 MM plug in charge lead.
Low Profile.  Terminals on switch side.
Ideal for "Trail Car" doorway installation.
PDF Instructions
ON BOARD INSTALLATION KITS
BIK-U3A A$39 (L)
US $28
 3 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on switch side.
PDF Instructions
BIK-U3B A$39 (L)
US $28
 3 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on the reverse side.
PDF Instructions
BIK-U6A
 		$45 (L)
US $32
 6 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on switch side.
PDF Instructions
BIK-U6B
 $45 (L)
US $32
 6 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on the reverse side.
PLUG IN LIGHTING, SOUND TRIGGERS & FUNCTION CONTROLS.
CLICK "HERE"
9 VOLT Tx HANDPIECE BATTERY.
SB2423
 		$ 4 (L) LOW COST QUALITY
9 volt PP3 Alkaline batteries for TX handpieces.
Cannot be posted overseas.
GO HERE FOR OTHER 2.4 Ghz DSM2 TX HANDPIECES & RX's.
GO HERE FOR SUITABLE BATTERIES & CHARGERS.
GO HERE FOR OTHER INSTALLATION KITS.
GO HERE FOR CONNECTORS.

 

USERS WANTING SOUND SYSTEM TRIGGERS WILL REQUIRE:
1 x Suitable sound system with speaker.
1 x R/C switch. To trigger sound functions.
1 x # SIG-REV servo reverser needed for Kadee© servo uncouplers.