A SELECTION OF BATTERIES & CHARGERS.
 
PLEASE NOTE.  THE MAINS POWER SUPPLIES ARE ONLY SUITABLE FOR USE IN AUSTRALIA.
It is not possible to post batteries overseas from Australia.

CLICK ON THE PICTURES FOR MORE DETAILED INFORMATION,
INCLUDING PDF FILES OF WIRING INSTRUCTIONS.
 
    Click here to convert currency.

Model Price Image Description
HYBRID NiMh-ALKALINE LOOSE CELL RE-CHARGEABLE BATTERIES
See below for suitable battery holders.
LSD-AAA
$ 33
Pack of 4 x fully charged AAA ENELOOP
LSD hybrid batteries.
Ideal if you plan on using AAA size battery holders.
Please use only with locos up to 1 amp current drain.
LSD-AA
$27 (L) Pack of 4 x fully charged AAA ENELOOP
LSD hybrid batteries.
Ideal if you plan on using AA size battery holders.
Please use only with locos up to 1 amp current drain.
DUAL OUTPUT Tx & Rx BATTERY CHARGER
RX-CHARGER $29 Mains powered 4.8 volt charger for the above batteries.
Charge lead plugs into the HT-7215 ON-OFF switch assembly.
ALKALINE LOOSE CELL NON RE-CHARGEABLE BATTERIES
See below for suitable battery holders.
SB2413
$  4 LOW COST QUALITY
1.5 volt AAA Alkaline batteries pack of 4.
S4955B
$  4 LOW COST QUALITY
1.5 volt AA Alkaline batteries pack of 4.
Li-Ion BATTERIES
Now that we can obtain Li-Ion batteries with low voltage cut off pcb's, RCS is proud to offer a selection of
4 x cell (4s - 14.8 volts) capacities & configurations.
CONTACT RCS FOR OTHER CONFIGURATIONS AND CAPACITIES.
"AA" size cells.
Li-850-B4
A$119 DETAILS 850 mah Brick.
Li-850-F4
A$119 DETAILS 850 mah Flat-4.
Li-850-T4
A$119 DETAILS 850 mah Twin Stick.
18500 size cells. (Shorter version of 18650 size cells).
Notes on L1-1700 series pricing.  The suppliers charge more than the Li-2600 series.
Li-1700-B4
A$179 DETAILS 1700 mah Brick.
Li-1700-F4
A$179 DETAILS 1700 mah Flat-4.
Li-1700-T4
A$179 1700 mah Twin Stick.
CLIMAX
A$179 Special 1700 mah 2 x part pack.
For the Bachmann Fn3 Climax.
Forum article on how to use it.
18650 size cells. Standard Li-Ion cell.
Li-2600-B4
A$159 2600 mah Brick.
Li-2600-F4
A$159 2600 mah Flat-4.
Li-2600-T4
A$159 2600 mah Twin Stick.
Li-2600-T5
A$199

2600 mah 4 x Twin Stick + 1 in valley.
5 x cell (5s) 18.5 volts.
Ideal for USAT & ARISTO 6 axle locos.

The above packs are now available with 3,400 mah 18650 cells
Li-3400-B4
A$199 3400 mah Brick.
Li-3400-F4
A$199 3400 mah Flat-4.
Li-3400-T4
A$199 3400 mah Twin Stick.
Li-3400-T5
A$249 3400 mah 4 x Twin Stick + 1 in valley.
5 x cell (5s) 18.5 volts.
Ideal for USAT & ARISTO 6 axle locos.

CHARGERS
THE FOLLOWING CHARGERS ARE SUPPLIED WITH A 2.5 mm DC PLUG THAT FITS THE 2.5 mm JACK USED IN RCS INSTALLATION KITS.
SEE BELOW FOR OTHER CONNECTORS.

Other than MB3633, the Chargers require 2a or 5a 12 volt DC supply.
# 50W-6-AMP
A$59 2 ONLY
1 - 6S LI-PO  1 - 15 CELLS NI-CD & NI-MH
Intro instructions
# 80W-10-AMP
A$69 3 ONLY
1 - 6S LI-PO  1 - 15 CELLS NI-CD & NI-MH
Intro instructions
# MB-3632
 A$79 Special Price 2 x only Quality JayCar
Multi chemistry conditioning charger.
Up to 15 NiCd or NiMh cells.
Up to 6 Li-Ion or LiPo cells.
# CABL-MULTI would be very useful.
# MB-3633
 A$99

 Mains powered quality JayCar
Multi chemistry conditioning charger.
Up to 15 NiCd or NiMh cells.
Up to 6 Li-Ion or LiPo cells.
Intro instructions
For full details go to
https://www.techbrands.com/store/product/mb3633.aspx

# CABL-MULTI

A$10 Standard banana plugs with connectors for:
Tamiya,  2.5 mm (Futaba & JR).
RX (Hi Channel & Low Channel).
CHARGER 12v DC POWER SUPPLIES
MP3490
A$30

  MP3490 Regulated 2.5 amp 12 v DC switchmode power supply for the:
OBS-4, MB-3632 & AC-8-150W. Plus others
With 7 x different plugs.
Only for use in Australia.

 MP3242
 A$69  

MP3242 Regulated 5 amp12 v DC switchmode power supply for the:
OBS-4, MB-3632 & AC-8-150W. Plus others
With 2.1mm & 2.5mm plugs.
Includes 240 volt IEC mains cable.

Only for use in Australia.

4, 6 & 8 x CELL BATTERY HOLDERS.
Fitted with standard Futaba - JR servo plugs.
4-AAA-FLO
A$10 (L)
Holds 4 x AAA size batteries in a FLat Open  format. 
Small size for small locos - Flat holder for under roof etc.
With standard RX battery plug.
4-AA-FLO
 A$10 (L)
Holds 4 x AA size batteries in a FLat Open format. 
Flat holder for under roof etc.

With standard RX battery plug.
 
 4-AA-TS
A$6 (L)
Holds 4 x AA size batteries in a Twin Stick
 format.  Small size for small locos.
With standard RX battery plug.
4-AA-Brick
A$6  Hi Channel Battery holder holds 4 x AA size batteries in a square brick format. With a standard 3 place RX battery plug.
Wire 3 x packs in series for 14.4 volts.
 6-AA-Brick
A$6     Holds 6 x AA size batteries in a Brick format. 
With standard RX battery plug.
Wire 2 x packs in series for 14.4 volts.
8-AA-Brick
A$8  Holds 8 x AA size batteries in a Brick format. 
With standard RX battery plug.
Wire 2 x packs in series for 19.2 volts.
 Please Note.  When wiring battery packs in series to obtain a higher voltage, all batteries must be the same type, size and capacity.

N.B. BATTERY SELF DISCHARGING.
ALL RECHARGEABLE BATTERIES SELF DISCHARGE OVER TIME.
Please visit https://batteryuniversity.com/learn/article/elevating_self_discharge  for more information on how to care for batteries.
Please visit https://batteryuniversity.com/learn/article/how_to_store_batteries for information on storing batteries.


Back to the RCS Home