LOW POWER ESC's
DIGITAL PROPORTIONAL "CENTRE OFF" 30 WATT
ELECTRONIC SPEED CONTROLLER's  (ESC).

ESC's MADE IN THE UK BY FOSWORKS & MTRONIKS RADIO CONTROL. APRIL 2019

LOW COST ESC's THAT FEATURE PLUG IN MODULAR
COMPONENTS FOR EXTRA FUNCTIONS.

SIMPLIFIED WIRING DIAGRAM COURTESY OF MyLocosound.

USE WITH ANY REGULAR 2.4 GHz MULTI CHANNEL RX. SOLD SEPARATELY.
SUPER SMALL 3O WATT ESC's ARE TOTALLY SOLID STATE. 
NOW IT IS FINALLY POSSIBLE TO BATTERY POWER YOUR SMALLEST
"G" SCALE LOCOS & MANY "0" SCALE LOCOS.

"CENTRE OFF CONTROL"
Just one channel, (ie one knob) is used to control both speed and direction. 
RCS HAS TWO DIFFERENT VERSIONS AVAILABLE:

VIPER-10-12 COBRA-160-ESC
7.2 VOLTS - 12 VOLTS
(30 WATTS MAX)
 7.2 VOLTS - 24 VOLTS
(30 WATTS MAX)
SPECS & INSTRUCTIONS SPECS & INSTRUCTIONS

  Click here for an up to date currency conversion.

Model Price Image Description

DESIGNED FOR USE WITH ALL RCS TX HANDPIECES.
Can only be supplied as CENTRE OFF control.
Centre OFF Speed & Direction on Ch # 1.  OR, Can be assigned to Ch # 3.
CONTROL 2 x LOCOS FROM MOST RCS TX HANDPIECES.
EASY PLUG IN INSTALLATION WITH JST CONNECTORS SUPPLIED.
A FLEXIBLE BATTERY R/C SYSTEM THAT ALLOWS FOR PLUG IN ACCESSORIES TO EXPAND THE SYSTEM CAPABILITIES.
See below for directional constant brightness lighting.
Contact RCS for information if using other brands of TX's.
VIPER ESC's use a 100 Hz PWM frequency which may cause an audible hum at low speed depending on the loco.
They require a suitable 4/6 Channel RX and TX handpiece.

SUITABLE FOR SMALL TO MEDIUM SIZED BATTERY LOCOS.
15 volts actual is the absolute maximum for the # VIPER-10-15.
A
fully charged 4s Li-Ion battery can reach 16 volts & may cause erratic operation.
10 x AA cell 12 volt ENELOOP battery package deals are now available.

VIPER-10-15

$49 (L)

7.2 v to 15 volts. 6 amps - 10 amp peak.
Basic PDF instructions
READ THE FULL SPECS

COBRA-160

$79 (L)

6 volts to 24 volts.  5 amps - 14 amp peak.
30 Watts continuous. Settable Inertia.
45 mm x 20 mm x 10 mm. JST cables.
PDF instructions

CENTRE OFF ESC's DO NOT HAVE DIRECTIONAL LIGHTING.
The # MRW-SSLS solves the problem.
DUAL CONSTANT BRIGHTNESS FORWARD & REVERSE LIGHTING R/C SWITCH.
Power by R/C BEC or Traction batteries.

Provides 2 x Lighting controls. Can be used with any spare channel for manual R/C control.
The
# MRW-SSLS reads direction of motor channel to
automatically change lighting direction.
When using LED's, the supplied 1k dropping resistors must be fitted.
MRW-SSLS
A$36 (L) Solid State Lighting Switch.
Lights are ON before loco moves.
PDF Instructions
Plug 'n' Play installation kits for Aristocraft & Bachmann locos equipped with a PnP socket and allows any brand of R/C to control them.
BATTERY-PNP A$19 (L) Simplified Battery only 3 amp Plug'n'Play adaptor for the standard AC/Bach socket.
PDF Instructions
TRAIL CAR INSTALLATION KITS.
BIK-TC1
$27 (L) Fit pcb in the doorway of an "0" or Largescale boxcar.  1 amps fused. Screw terminals.
With charge jack and On-Off switch.
PDF Instructions
BIK-TC3
A$39 (L) 3 amp Universal Battery Installation Kit.
  Slide Switc.  2.5 MM plug in charge lead.

Low Profile.  Terminals on top.
Ideal for "Trail Car" doorway installation.
PDF Instructions
BIK-TC6 A$45 (L) 6 amp Universal Battery Installation Kit.
  Slide Switch.  2.5 MM plug in charge lead.
Low Profile.  Terminals on switch side.
Ideal for "Trail Car" doorway installation.
PDF Instructions
ON BOARD LOCO INSTALLATION KITS.
BIK-U3A A$39 (L) 3 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on switch side.
PDF Instructions
BIK-U3B A$39 (L) 3 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on the reverse side.
PDF Instructions
BIK-U6A
$45 (L)  6 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on switch side.
PDF Instructions
BIK-U6B
$45 (L)
 6 amp Universal Battery Installation Kit.
   ToggleSwitch & 2.5 MM plug in charge lead.
  Terminals on the reverse side.
PDF Instructions
GO HERE FOR DUAL USE 2.4 Ghz DSM2 TX HANDPIECES & RX's.
GO HERE FOR EVO LOW COST 2.4 Ghz DSM2 TX HANDPIECES & RX's.
GO HERE FOR SUITABLE BATTERIES & CHARGERS.
GO HERE FOR CONNECTORS.
GO HERE FOR INSTALLATION KITS.

U-BEC-5v

$10 (L)

BEC 3.5 Amp 5 volt supply to drive servos
that control accessory functions such as Kadee uncouplers. A  7.4 volt pack is ideal.

SIG-REV
$ 12 (L) Small inline device that reverses the servo signal.  Needed with Kadee© servo uncouplers.
PLUG IN LIGHTING, SOUND TRIGGERS & FUNCTION CONTROLS.
CLICK "HERE"

CLICK HERE FOR INSTALLATION SERVICE INFORMATION.
 
GOT A FAVOURITE LOCO THAT NO LONGER RUNS WELL?
CLICK HERE FOR INFORMATION ON HOW TO REJUVENATE IT.


USE ANY RCS TX HANDPIECE FOR COBRA-160 & VIPER-10 ESC's.
EACH TX WILL REQUIRE A STANDARD 9 VOLT ALKALINE TRANSISTOR BATTERY.

Contact RCS for information if using other TX's.
VIPER ESC's do not have directional constant brightness lighting outputs.  
Use Rx102-1(AB)LR or MRW-SSLS.
  
DAMAGE CAUSED BY MISUSE WILL BE OBVIOUS TO US & IS NOT GUARANTEED.
IF YOU BLOW IT UP & TELL US HOW YOU DID IT, WE MAY WARRANT THE ITEM ANYWAY.
 
THE PWM OUTPUT OF THESE MOTOR DRIVERS SHOULD NOT BE USED WITH ANY DCC DECODER EQUIPPED LOCOS.

PLEASE NOTE.

RCS DOES NOT PROVIDE PRINTED INSTRUCTIONS FOR ALL ESC'S.

PDF instruction booklets are available for the brand of R/C being used + FIVE  different sound systems.

Click HERE for a list.
 

IF YOU HAVE A PROBLEM WITH YOUR RCS SYSTEM

CLICK TROUBLESHOOTING  FOR  HELP.

 ECLIPSE