AUTO BIND DSM2/DSMX RECEIVERS

DSM2/DSMX AUTO BIND RECEIVERS.
FEATURE LM0034-E LM0019-T RX-108-EM RX-108-TM
DISABLED
FAILSAFE
YES YES YES YES
AUTOMATIC
BINDING
 YES NO YES YES
DIRECTIONAL
F & R LIGHTING
NO NO YES YES
SERVO
REVERSING

NO NO YES YES
LIST PRICE A$ 29
A$ 25  TBA TBA

2.4 GHz DSM2/DSMX receivers
LM0019 & LM0034 Rx's are not programmable.
A plug in servo reverser (# SIG-REV) is available if needed.
FROM ONLY A$ 25 EACH. GB £14. US $ 20
See below for programmable Rx's.

      

NOW AVAILABLE.
BASIC 6 CHANNEL AUTOMATIC & MANUAL BIND DSM2/DSMX RECEIVERS
.
 
LIST OF FEATURES

  * AUTOMATIC BINDING FOR LM0034. NO BINDING PLUG.
  * DISABLED FAILSAFE.  OK TO TURN TX OFF & CRUISE.  
  * SUITS LIVE STEAM R/C & BATTERY R/C AS IS.
  * ALL CHANNELS OUTPUT 100% (90°) SERVO THROW.

 
Model Price Image Description
IN STOCK AUTOMATIC BIND (A-B) Rx'S
IDEAL FOR BATTERY R/C & LIVE STEAM.
LM0034-E
A$29 (L)
US$ 21
Xenon Auto Bind Rx with Dual 10 cm Diversity antennas.  End Mount pins.
Updated PDF Instruction Manual @ 01/09/22
MANUAL BIND TOP MOUNT Rx's
LM0019-T
A$25 (L)
US$ 21
Xenon Manual Bind Rx with a single 10 cm Diversity antenna. Top Mount pins.
PDF Instruction Manual @ 10/10/20
SAVE  A$ 15.00 WITH A 6 x PACK OF RX's.
Discounted price and available with End Mount pins only.
LM0034-EM-6
A$159 (L)
US$ 119
6 x Xenon Auto Bind Rx's with dual 10 cm Diversity antennas.  End Mount pins.
Rx BATTERY REQUIREMENTS

The above receivers can use 4 x AA or AAA re-chargeable cells. (4.8 volts nominal).  However, if the battery voltage sags below 4.6 volts, erratic behaviour can occur.
For the best and most reliable performance we suggest at least welded packs of
4 or 5 x AAA rechargeable cells. Plastic holders & Alkaline cells not recommended. 
Alternatively you can use a # UBEC-5v regulator pcb and higher voltage batteries. Rx Voltage range = Minimum 4.8 volts - 8.4 volts maximum.   
N.B. THE ACTUAL MAXIMUM PERMITTED DEPENDS ON THE SERVOS USED.
MOST MINI & MICRO SERVOS ARE LIMITED TO 6 VOLTS. 
RCS NOW HAS AFFORDABLE SERVOS  FOR 7.4 VOLTS.
Rx batteries are not needed with ESC's. The ESC provides the 5 volt supply.

U-BEC-5v $15 (L) BEC 3.0 Amp 5 volt supply for heavy duty servo use.  Very useful if using MyLocosound in Live Steam locos.  A  7.4 volt pack is ideal.
(Instruction manual)
IF R/C TRIGGERS ARE REQUIRED,
THE INSTRUCTIONS HAVE AN APPLICATION GUIDE.
   
 

FOR BATTERY R/C LOCOS.
USE THESE BASIC Rx's AS IS.  THE 
5 VOLT ESC OUTPUT POWERS THE R/C.
NO OTHER R/C BATTERIES NEEDEDED.

COMPATIBLE WITH ALL CENTRE OFF & LOW OFF ESC's.
CLICK HERE FOR A LIST OF PLUG IN R/C SWITCHES FOR LIGHTS & SOUND TRIGGERS.

 

ADJUSTABLE
DSM2/DSMX AUTO BIND RECEIVERS

The following # Rx-108 Rx's will adjustable.
They can make changes to servo reversing settings.

OR.  Use as is if servo programming is not required.

A simple plug in servo reverser (# SIG-REV) is available instead.

 

AVAILABLE SOON TBA.
5 CHANNEL, 7 FUNCTION AUTOMATIC BIND RECEIVERS
.
 
LIST OF FEATURES

  * AUTOMATIC BINDING.  BINDING PLUG NOT NEEDED.
  * SUITS BATTERY R/C AS IS  -  NO ADJUSTING NEEDED.
  * CAN BE USED FOR LIVE STEAM R/C. SERVO REVERSING.  
 
  * JUMPER PLUG CHANGE FROM CENTRE OFF TO LOW OFF.
  * DUAL DIVERSITY ANTENNAS FOR BEST PLACEMENT.
  * ALL CHANNELS OUTPUT 100% (90°) SERVO THROW.
  
* FORWARD & REVERSE CONSTANT BRIGHTNESS LIGHTING.
  * CLEAR HEATSHRINK PROTECTED.  * DISABLED FAILSAFE.
  * WILL MATCH UPCOMING 10 CHANNELS Tx CORE. 
  * 
EASY QUICK START INSTRUCTIONS.

 
SOUND TRIGGERS USING RCS Tx HANDPIECES.
All RCS handpieces can use Ch # 5 for a sound trigger.  Usually a whistle or horn. 1 - 3 max.
# DU-Tx3 requires an R/C switch with 1 x trigger per channel = 3 - 5 Triggers max.
# DU-Tx5 requires an R/C switch with 2 x triggers per channel = 3 - 7 Triggers max.
IF R/C SWITCHES ARE REQUIRED
THE INSTRUCTIONS HAVE AN APPLICATION GUIDE.
USING MYLOCOSOUND WILL REQUIRE ADD ON R/C TRIGGERS.
CLICK HERE FOR FOR FULL LIST OF SUITABLE R/C SWITCHES.

 
Model Price Image Description
BATTERY REQUIREMENTS.
(High quality welded pack ENELOOP AA & AAA batteries are HERE.
The above receivers can use 4 x AA re-chargeable cells. (4.8 volts nominal).  However, if the battery voltage sags below 4.6 volts, erratic behaviour may occur.
For the best and most reliable performance we suggest at least welded packs of
4 x AA or 5 x AAA rechargeable cells work best.
Alkaline AA cells are useable. PLASTIC BATTERY HOLDERS ARE NOT ADVISED. 
For reliable power use a # UBEC-5v regulator pcb and higher voltage batteries.
Rx Voltage range = Minimum 4.8 volts - 8.4 volts maximum.
Rx batteries are not needed with ESC's. The ESC provides the stable 5 volt supply.
 U-BEC-5v $15 (L) BEC 3.0 Amp max 20 v in, 5 volt supply out for heavy duty servo use.  Very useful if using MyLocosound in Live Steam locos. 
A  7.4 volt pack is ideal if space permits.
PRE-WIRED PLUG IN HI-INTENSITY LED's FOR Rx's.
Automatic Forward & Reverse lighting.  Ballast resistors not needed. 
MUST ONLY BE USED with AB-Rx-v2-EM & AB-Rx-v2-TM Rx's.
LED-3mm-WW
A$10 (L)
US$7
20 cm servo lead with 1600mcd 3 mm Warm White LED.
Front or Rear LED headlight.
Requires heat protection if used with Live Steam.
LED-5mm-WW
A$10 (L)
US$7
20 cm servo lead with 25000mcd 5 mm Warm White LED.
Front or Rear LED headlight.
Requires heat protection if used with Live Steam.
LED-3mm-G
A$5 (L)
US$7
15 cm servo lead with 3 mm Green LED.
Use for externally observing what the Rx is doing when programming. Plugs into Front light.
 
 
Model Price Image Description
EXTRA SERVO REVERSERS
Reverses any one servo that is backwards.

OK with Hi-Tec & Dual Sky servos. Useful when two servos are working together on one signal.
Needed if one servo throw is backwards relative to the other engine.  
E.G. Garratt type locos. 
FOR LIVE STEAM MAXIMUM 6.0 VOLT NOMINAL.
SIG-REV
A$5 (L)
US$ 3
For use with 4 x dry cells or
5 x rechargeable batteries.
IN LINE pins.
Made in China.
OTHER SERVO REVERSERS & THROW ADJUSTERS
MRW-11
$ 24 (L)
US$16
END POINT EXPANDER & REVERSER.
Reverse servo & adjust servo centre + end points from 90o full throw to 180o full throw.
35 mm x 18 mm x 7 mm  PDF Instructions
HANDY PLUG IN DEVICE FOR MEASURING PULSE WIDTH.
PULSE-MEASURE
A$29 (L)
US$20
Simply plug into any channel to measure the PWM of servo signal.

R/C SWITCHES HERE FOR FOR PLUG IN ACCESSORY FUNCTIONS