SOUND SYSTEMS Feb 1st 2013
THIS PAGE IS ONLY FOR AUSTRALIAN CUSTOMERS.
RCS sells Phoenix & MyLocosound sound systems in Australia.
RCS sells Phoenix & MyLocosound sound systems in Australia.
All sound systems below are compatible with RCS. Supplied without speakers unless stated otherwise.
Prices are in A$.
Prices are in A$.
|
PHOENIX*
|
||
PB11  |
Digital sound w/ battery back up & speaker. Suits DC, DCC & Battery R/C. Push in terminals.
(Contact us by E Mail to tell us which specific sound is required)
|
$399 |
|
P8 |
Full digital sound system. DCC & battery R/C compatible. Plug in.
(Contact us by E Mail to tell us which specific sound is required)
|
$279 |
| PROGRAMMER | Computer program + hardware for loading & customising sounds to pcb’s | TBA |
| MyLocosound H0 | ||
|
DIESEL-H0 |
Synthesised low cost diesel sound. For H0 diesel locos. | $95 |
|
STEAM-H0
|
Great sounding, synthesised low cost steam chuff sound & whistle for H0 locos. | $95 |
| MyLocosound Large Scale | ||
|
DIESEL (L) |
Synthesised low cost diesel sound. Suits small Large Scale diesel locos. | $95 |
|
STEAM (L) |
Great sounding, synthesised low cost voltage controlled steam chuff sound & whistle. | $95 |
|
STEAM-T (L) |
Great sounding, synthesised low cost cam controlled steam chuff sound & whistle. | $95 |
|
SPEAKERS We have a range of speakers to suit the above sounds. Click HERE for pics. |
||
| C0600 |
ROUND 40mm mylar cone speaker 1/10th watt output.
|
$ 5 |
| C0603 | ROUND 50mm mylar cone speaker 1 watt output. | $ 5 |
| C0613R | ROUND 63mm mylar cone speaker 5 watt output. | $15 |
| 40 x 30 | OVAL 40 mm x 30 mm speaker 1 watt output. | $15 |
| 70 x 40 | OVAL 70 mm x 40 mm Phoenix speaker 2 watt output. | $16 |
| 90 x 50 | OVAL 90 mm x 50 mm speaker 5 watt output. | $16 |
| C0604 | SQUARE 50 mm mylar cone speaker 1 watt output. | $5 |
| C0613S | SQUARE 63 mm mylar cone speaker 5 watt output. | $7 |
| C0616 | SQUARE 4" speaker 5 watt output. 4 and 8 ohm windings. | $9 |
| PH-3" | ROUND 3" Phoenix speaker 2 watt output. | $16 |
|
The full range of diesel & steam sounds, with sample sound files for the above manufacturers, can be heard at:
PHOENIX. http://www.phoenixsound.com/ Steam, Diesel, Miscellaneous & European.
MyLocosound. http://www.mylocosound.com/ Steam and diesel. Now with a mechanically timed chuff, triggerable whistle and automatic bell.
RCS supplies Phoenix sound systems preloaded with the sound of your choice. Or DIY with the Phoenix programmer.
P8 & PB11 SPECIAL INFORMATION
P8.
The Phoenix P8 is compatible with the RCS OMEGA-3, PRO-3, PRO-6 & PRO-PnP ESC’s. Screw terminals are used.
You MUST disable ALL DCC functions & set the DCC address to 0 (zero). Otherwise erratic operation may result.
PB11.
The PB9 sound system can be interfaced with the RCS OMEGA-3, PRO-3, PRO-6 & PRO-PnP ESC’s. Push in terminals are used.
You MUST disable ALL DCC functions & set the DCC address to 0 (zero). Otherwise erratic operation may result.
SETTING UP & PROGRAMMING THE SOUND SYSTEMS YOURSELF.
OMEGA-3, PRO-3, PRO-6 & PRO-PnP series.
The Phoenix PB11 & P8 config files are preset from the factory to suit RCS ESC's.
All of the trigger functions in both the PB11 & P8 should be left at or set to LOW.
To install them simply load the full Phoenix program into your sound system.
The Phoenix system installer will automatically overwrite the config file. You must install loco matching files otherwise erratic system operation may occur. Once loaded reassign the trigger functions to suit the RCS ESC as outlined in the specific ESC instructions. Then save the config file in an appropriate folder in your computer.
You can of course customise the files to suit whatever preferences you have. You can reassign any trigger function to any sound you wish to trigger. |