A # PRO-6 includes 1 x Programming pushbutton. 1 x 100 mm (4") 4 x wire ESC - Decoder cable.
ONLY A$99 each.
CLICK HERE FOR FULL PRICE LIST
The # PRO-6 is designed for use with Track Power and/or Battery Power.
TRACK POWER ONLY. Simply plug in to the socket and switch track power ON.
TRACK POWER WITH BATTERY BACK UP. Simply plug in to the socket and switch track power ON. Battery pack is connected to the 2 x way plug in socket on the ESC.
BATTERY POWER ONLY. Connect battery pack to either the Loco input or the BATT terminal on the ESC.
2 x Part ESC available for four different brands of R/C.
| SPECIFICATIONS | ||||||
| PART # | DECODER SIZE MM |
ESC SIZE MM |
ACC FUNCTIONS |
INSTALLATION | MAX POWER |
VOLTS |
| PRO-6 | 48 x 48 x 15 |
49 x 53 x 25 |
4 x MOM or FF | Screw terminals |
90 va* | 14 - 24* |
BATTERY VOLTAGE:
All battery packs state a NOMINAL voltage on the pack.
When freshly charged the actual voltage can exceed the NOMINALvoltage.
eg. An 18 volt Ni-Cd pack can read 24 volts when fully charged.
RCS takes
into account the excess voltage when batteries are freshly charged
when listing what is the maximum voltage you can use.
Likewise the NOMINAL voltage also takes into account the likely voltage drop when discharging.
It is the NOMINALvoltage on the battery pack that is the maximum & minimum voltage you can use.
*We recommend using a 5 volt fan when using the the RCS PRO-6 at higher voltages.
PRO-6 BASIC WIRING DIAGRAM
BINDING THE RX TO THE TX.
Ideally "BINDING" the TX & RX together is done before installing the RX into the # DEC-U decoder part.
This can be done with any regular R/C RX battery pack and following the R/C maker instructions.
If this is inconvenient the # DEC-U has a plug in terminal for binding SPEKTRUM & HOBBY KING RX's in situ.
Please note. The RX's shown plugged in below are for illustration purposes only.
They are sold separately & not supplied with the RCS # PRO-3.
SPEKTRUM & PLANET R/C RX's simply plug in upside down on the # DEC-U.
The following pics showing how to plug in the RX are for the older version # DEC-U & ESC.
They can be set up for remote connection with the separate purchase of the # DEC-ADPT.
E-SKY & HOBBY KING must use the # DEC-ADPT.