ELITE ELECTRONIC SPEED CONTROLLERS.

TO ORDER FOR THE FIRST TIME.
A complete RCS ELITE R/C system = One TX-24 handpiece + One RX-8/ELITE ESC receiver speed controller combination.
Select an RX-8/ELITE ESC combination that meets your requirements using the same frequency as the TX-24 handpiece.
 
TO ORDER AN EXTRA RX-8/ELITE ESC WITHOUT THE TX-24 HANDPIECE.
Order the frequency that matches your existing TX-24 handpiece.  Set up as many same frequency systems as you wish.

FOR MORE DETAILED INFORMATION ON EACH ITEM PLEASE CLICK ON THE PICTURE.

PLEASE NOTE INSTRUCTIONS ARE NOT SUPPLIED WITH THE ESC's.

PLEASE GO HERE FOR DOWNLOADABLE PDF FILES.

Click here to convert currency.

Model Price Image Description
TX-24

 US$80
A$100

Long Range 8 x Button handpiece.
Speed, Direction & Emergency STOP.
3 x manual sound triggers.
Multiple locos from 1 x TX handpiece.
ELITE-3

US$159
A$199

 Our most popular 3 amp ESC 
ELITE-6

US$229
A$279

6 amp high voltage ESC.
High power for really big locos.
ELITE-9

US$179
A$199

9 amp high voltage ESC.
High power for really big locos ganged together.
PnP-AC US$189
A$159

 3 amp Plug'n'Play ESC for Aristocraft locos.
Requires # B-SW3 for sound triggers.

PnP-BK  US$189
A$159		  3 amp Plug'n'Play ESC for Bachmann locos.
Requires # B-SW3 for sound triggers.
 ACCESSORIES TO ENHANCE PERFORMANCE OF ELITE ESC's
AZARR-27 US$14
A$18		 Optional extra long range antenna
B-SW3 US$20
A$29		 Sound triggers for PnP ESC's
SSI-12v5 US$45
A$54		 Sierra sound interface.
RELAY US$25
A$30		 Relay that reverses constant voltage. 
REG-12v US$12
$15		 12 volt regulator.
FAN-12v60w US$10
A$10		 12 volt cooling fan.
REG-5v

US$12
A$15

 5 volt regulator.
RF-CHK-3 US$15
A$18		 3 amp motor "noise" suppressor.
RF-CHK-5 US$18
A$21		 5 amp motor "noise" suppressor.

 

 Each ESC includes one plug in 42 x 25 x 14 mm RX-8 receiver and connector cable. 

BATTERY VOLTAGE: When freshly charged, all battery packs measure more voltage than is nominally stated on pack.
Min Minimum, N Nominal voltage stated on battery. This NOMINAL voltage is the maximum you can use.
 
We supply .1µf monolithic caps to be applied to the motor terminals. This may be difficult to do. Please consider installing the highly recommended # RF-CHK-3/5 pcb which does provide excellent motor noise suppression & is easy to fit. 
 
SOUND SYSTEMS: The ELITE  series (PnP series require # B-SW3) can be used as is with all sound systems. Each ESC has outputs for constant brightness forward & reverse lighting + one manual & two automatic sound triggers. SIERRA will require the # SSI-12v5.

IN THE USA, UNDER SECTION 95.603B OF THE ACT, FORMAL FCC APPROVAL OF THIS LOW POWER R/C EQUIPMENT IS NOT NECESSARY.
 
THE PWM OUTPUT OF THESE MOTOR DRIVERS SHOULD NOT BE USED WITH ANY DCC DECODER EQUIPPED LOCOS.
 

Click here for PDF ELITE-3 Instructions

Click here for PDF ELITE-6 Instructions

Click here for PDF ELITE-9 (Link to come)

Click here for PDF ELITE-3PnPAC Instructions

Click here for PDF ELITE-3PnPBK Instructions

ELITE-3 US$159 Our most popular 3 amp ESC
ONLY AVAILABLE IN THE USA.
Copyright RCS © 2010. Webdevelopment by Ben Dyson